Euro Sport Camber Plates
SPC Camber Kit
SPC or 247 Camber Shims
H&R or SPC Camber Bolts
Euro Sport camber plates are for RACE USE ONLY. Installation
of the camber plates requires cutting the
elevated steel ridge on the front strut
towers.
|
Euro Sport Race
Camber Plates
Under
extreme conditions, such as road racing,
our camber plates are a must. Made from
heavy-duty cad-plated steel to withstand
the abuse of track use. The plates are
designed to give 3-4° of additional
camber. Our design also incorporates a
5/8" spherical bearing to replace the
function of the OEM strut top bearing,
once it has been removed for installation
(Requires cutting and drilling top of the
strut towers). Included are new alloy
bolts, washers, locknuts and
instructions. In order to take full
advantage of our camber plates, it is
recommended that coil-over suspension be
utilized. Camber plates fit Mk1,
Mk2, and Mk3 VW's. Each camber plate and
adjustment spacer sold separately.
Euro Sport Race Camber Plate -
Mk1/Mk2/Mk3 Volkswagen All
For Race
Applications ONLY, Body
modification Required
|
18600K
|
$109.95 Ea
|
|
1/4" Aluminum Spacer for Euro Sport
18600K Camber Plate
|
18625
|
$15.95 Ea
|
SPC Mk4
Volkswagen/Audi TT Camber/Caster
Kits
Now it is possible
to adjust the front camber on newer
Volkswagens and Audi TT. This kit will
provide a 1° positive or negative change
for camber and/or caster. To install,
simply remove the strut assembly,
compress the spring and replace the O.E.
upper bearing plate with this adjustable
plate. One kit covers one side of the
vehicle.
Combine the rear camber adjustment shims
for a -.50° to -1.0° camber adjustment. A
recommended installation tool is also
available for ease of installation.
|
Audi
|
|
SPC Front Camber/Caster Kit
Audi TT 2WD & 4WD(00-up)
|
81340
|
$99.95 Ea
|
|
SPC +.5° Rear Camber Shim
Audi TT 2WD (00-up)
|
71530
|
$7.95 Ea
|
|
SPC +1° Rear Camber Shim
Audi TT 2WD (00-up)
|
71531
|
$7.95 Ea
|
|
SPC -.5° Rear Camber Shim
Audi TT 2WD (00-up)
|
71532
|
$7.95 Ea
|
|
SPC -1° Rear Camber Shim
Audi TT 2WD (00-up)
|
71533
|
$7.95 Ea
|
|
|
|
|
|
Volkswagen
|
SPC Front Camber/Caster Kit
Mk4 VW (99-up) / R32
|
81340
|
$99.95 Ea
|
|
SPC +.5° Rear Camber Shim
Mk4 VW (99-up) (Not R32)
|
71530
|
$7.95 Ea
|
|
SPC +1° Rear Camber Shim
Mk4 VW (99-up) (Not R32)
|
71531
|
$7.95 Ea
|
|
SPC -.5° Rear Camber Shim
Mk4 VW (99-up) (Not R32)
|
71532
|
$7.95 Ea
|
|
SPC -1° Rear Camber Shim
Mk4 VW (99-up) (Not R32)
|
71533
|
$7.95 Ea
|
|
|
|
|
|
Misc. SPC Parts
|
SPC EZ Shim Spacers
This set (4 different sizes - 2
of each) aligns caliper to rotor
after installation of a camber
shim. Specifically designed to be
used with the EZ Shim when
correcting some FWD cars with hub
mounted rear disc brakes. Can
also be used with the 71000
Series Shims
|
75970
|
$29.95 Ea
|
|
SPC Rear Shim Wrench
|
87530
|
$20.00 Ea
|
SPC EZ Cam™ XR Camber
Adjusting Bolts
The new EZ
Cam™ XR is designed for non-slotted
struts. It allows both positive and
negative camber changes up to
approximately 1.75 degrees (depending
on vehicle) by replacing the upper
O.E. strut/spindle bolt. This easy to
use adjuster provides built-in
adjustment over the life of a vehicle
just by rotating the head of the
bolt. Each kit contains two cam bolt
assemblies, enough for both sides of
the vehicle.
|
H&R
Camber Adjusting Bolts
Whenever you
lower a vehicle's ride height,
negative camber is increased-how much
depends on the vehicle and the
reduction in ride height. H&R's
new Triple C camber adjusters are a
simple, yet very effective means of
removing excessive camber, adjusting
your vehicle's camber settings, or
even correcting small side-to-side
camber variations for precise
alignment.
Consisting of a pair of
specially-designed bolts, H&R's
patented Triple C camber adjusters
replace the original upper
fastening bolts on all McPherson
strut applications. As the bolt is
turned, a small cam eccentric
alters the vehicle's camber,
allowing adjustments from 0-3
degrees, positive or negative.
Installation takes only minutes
with readily-available hand tools,
and benefits include increased tire
life, improved tracking and the
ability to dial in more camber for
weekend track events.
Quite
simply, H&R's Triple C camber
adjusters are a great value. No
other single suspension
modification can yield such
impressive results with such a
small investment in time and
money-and you can do it yourself.
Sold by a pair.
Click Here to view H&R
application fitments.
|
|
SPC Camber Bolts
|
|
|
|
Mk1 VW R/J/S 79-88
Mk2 VW Corrado 90-94
Mk2 VW Passat 90-97
Mk2 / Mk3 VW G/J 85-98
|
81250
|
$27.95
|
|
H&R Camber Bolts
|
|
|
TC110
(A:10mm,
B:36.0 - 48.0mm)
|
$45.75
|
|
TC210
(A:10mm,
B:45.5 - 48.0mm)
|
$45.75
|
|
TC112
(A:12mm,
B:40.0 - 48.5mm)
|
$45.75
|
|
TC212
(A:12mm,
B:30.0 -
39.0mm)
Fits:
Mk1 VW R/J/S 79-88
Mk2 VW Corrado 90-94
Mk2 VW Passat 90-97
Mk2 / Mk3 VW G/J 85-98
|
$45.75
|
|
TC114 (A:14mm,
B:35.0 -
48.0mm)
Fits:
Audi 80/90 (Typ 89)
Audi B4
|
$45.75
|
|
TC115 (A:15mm,
B:35.0 -
43.0mm)
|
$45.75
|
|
TC116 (A:16mm,
B:41.5 -
48.0mm)
|
$45.75
|
|
TC117 (A:17mm,
B:35.0 -
50.0mm)
|
$45.75
|
Mk1, Mk2, Mk3 Volkswagen Rear
Camber Shims
Now offer your Mk1, Mk2 and
Mk3 the same adjustability with these
rear adjustment shims from 247-parts.com.
Each shim is laser cut and precision
machined from stainless steel for exact
fit. Designed to fit between the rear
stub axle and axle beam using existing
bolts. Fits cars with or without ABS.
Available in a -.50° or -1.0° camber
adjustment. Each shim sold
separately.
|
247-Parts -.5° Rear
Camber Shim - Mk1, Mk2, and Mk3 VW
|
ALIGSHM0.5
|
$35.00 Ea
|
|
247-Parts -.75° Rear
Camber Shim - Mk1, Mk2, and Mk3 VW
|
ALIGSHM0.75
|
$35.00 Ea
|
|
247-Parts -1° Rear
Camber Shim - Mk1, Mk2, and Mk3 VW
|
ALIGSHM01
|
$35.00 Ea
|
|
Checkout/View Cart
