Euro Sport offers TWO TYPES of Cool-Flo air intake systems. Our standard Cool-Flo shielded air intake system is recommended for daily driver and harsh environments, and our new Cool-Flo Race air intake systems are a more true cold air intake primarily used for racing purposes.

These systems are designed to easily fit with no modifications to any stock components. We also allowed clearance room for our Upper Front Stress Bars.

**Our kits all come pre-oiled so they are ready to be installed when you receive them. To re-oil your filter after you clean it with warm mild soapy water, let it air dry. ONLY use ITG dust retention coating - Using other cleaners or oils will damage the filter, clog your MAF and void the filter warranty.

Is your intake tube or heat shield sold separately?
No. To discourage use of a lesser quality cotton gauze style filter on our system, we only offer them as a kit. However, the filters are offered separately.

*How do I know if my car is equipped with an air pump?
There is a very easy way to check this. First, open the hood on your car. Locate the black plastic panel that is attached to the radiator core support, near the hood latch. On the panel there should be a label that shows the location of the emission components in the engine bay. If anywhere on that label there is mention of an air pump, then you will need to purchase an ITG breather filter with your Cool-Flo. If you have any questions, feel free to call us at 800-783-3876.

Do you offer any other ITG Air Filters, or can I order a custom one?
Yes. While we are one of ITG's largest importers of their filters, we don't stock every part #. We stock some other makes & model air filters that are not listed online, and can also special order any that ITG offer.

Can I use K&N cleaners or oil on a on my ITG filter?
NO! This will damage the filter and void its warranty. Only use ITG Dust Retention Coating** to oil your filter, and follow directions that came with your filter for cleaning instructions. **ITG Dust Retention Coating not required for CIS Cool-Flo Intake Systems.

Euro Sport Cool-Flo Race Air Intake System
These are true "cold air" intake systems that situates the filter in the lower front region of the car, away from ALL engine heat. The Cool-Flo Race system utilizes 2.5" or 3" (depending on application) mandrel bent steel tubing along with laser cut bracketry. Other features include all tig-welded construction. We supply an ITG Maxogen air filter for the best possible flow and filtration. Factory mounting points are utilized for installation without the need for permanent modification or fabrication. Comes with a one year limited warranty.

Features of Euro Sport Cool-Flo's:
	Euro Sport Race Intake Tube • Mandrel bent steel construction • Powder coated finish • Tig-welded		Easy to clean connecting hoses • High temperature resistant • Three ply silicone construction • Oil resistant
	Induction Technology Group foam air filter • Three layer reticulated polyester foam element • Pre-oiled with ITG dust retention coating • Optimal filtration of particles as small as 10 microns • LIFETIME WARRANTY		Euro Sport heat shield • Steel construction • Two stage powder coated finish • Rubber hood seal • Tig-welded

Euro Sport Cool-Flo Air Intake Systems
These unique products offer an increase of 3-8 horsepower (depending on unit) and improve throttle response, and have proven to reduce the surrounding air intake temperature by as much as 50% compared to other brands. Included with each kit is the Euro Sport heat shield with rubber seal (except CIS), an Induction Technology Group, Ltd. air filter (an optional breather filter* is available for cars equipped with a smog pump), connecting hose, installation hardware, and installation instructions. Factory mounting points are utilized for installation without the need for permanent modification or fabrication. Comes with a Limited Lifetime Warranty.

Click Images to View Detail
Cool-Flo Race Mk3 Golf/Jetta 8v	15052	$219.95
for part # 15052	15JC60/77/125	$89.95
Cool-Flo Race Mk3 Golf/Jetta VR6	15074	$219.95
for part # 15074	15JC60/77/125	$89.95
Cool-Flo Race Mk4 Golf/Jetta 8v/1.8T (Available in Silver or Wrinkle Black Powdercoat)	15084	$219.95
for part # 15084	15JC60/73C	$89.50
Cool-Flo Race Mk4 Golf/Jetta VR6 12v/24v (Available in SIlver or Wrinkle Black Powdercoat)	15082	$219.95
for part # 15082	15JC60/73C	$89.50
Cool-Flo Race Mk4 R32 (Available in Silver or Wrinkle Black Powdercoat)	15083	$229.95
for part # 15083	15JC60/73C	$89.50
Cool-Flo Race VW Mk5 GTI 2.0T / Audi A3 2.0T (Available in Silver or Wrinkle Black Powdercoat)	15090	From $229.95
for part # 15090	15JC60/67C	$89.50
ITG Dust Retention Coating** **ITG Dust Retention Coating not required for CIS Cool-Flo Intake Systems.	ITG-DRC	$19.95 $25.00

Click Images to View Detail
Cool-Flo Mk2 Corrado VR6	15070	$219.95
for part # 15070	15JC60/73C	$89.50
Cool-Flo Mk3 Golf/Jetta 8v	15050	$219.95
for part # 15050	15JC60/67C	$89.50
Cool-Flo Mk3 Golf/Jetta VR6	15072	$219.95
for part # 15072	15JC60/73C	$89.50
Cool-Flo Mk4 Golf/Jetta 8v	15086	$219.95
for part # 15086	15JC60/67C	$89.50
Cool-Flo Mk4 Golf/Jetta VR6	15085	$219.95
for part # 15085	15JC60/73C	$89.50
Cool-Flo Mk4 Golf/Jetta 1.8T	15087	$219.95
for part # 15087	15JC60/67C	$89.50
*ITG Breather Filter	EBF30	$22.95
ITG Dust Retention Coating** **ITG Dust Retention Coating not required for CIS Cool-Flo Intake Systems.	ITG-DRC	$19.95 $25.00

Due to airline shipping restrictions, this item ships via Ground ONLY.

(Please note, the ITG filter comes with a Lifetime warranty to original purchaser only)

Company  |  Products  |  Dealers  |  Specials  |   Checkout/View Cart